IT门户网,专注电脑知识与技术及手机硬件信息服务网站!

当前位置:IT门户网 > 电脑笔记本 > 台式电脑维修 >

The Volume is dirty 的办理要领

时间:2021-09-14    来源:IT门户网    人气:

电脑D盘有问题,总是蓝屏,再重启总是检测D盘,报:The Volume is dirty.

在网上查了一下办理要领。

1)在"开始"-->"运行"下键入:cmd,进入msdos下,利用fsutil dirty query d: 来查抄d盘,报:The Volume is dirty.再键入CHKNTFS /X D:,报该盘分区NTFS.然后直接在运行处运行这个呼吁,没发明有什么结果。

2)重启计较机,发明以前的3个stage举办Check,此刻酿成5个stage 了。

3)颠末十来分钟的检测,进入系统。同样的要领进入msdos下,键入Chkdsk /f /r d:,会提示你:是否卸下所有的句柄,选Y,然后就分5个stage检测d盘(由于没了句柄,在check进程中D盘的对象不能用),竣事后用 fsutil dirty query d:来测试发明功效:没有损坏。修复乐成。

4)从头启动,发明系统好了。

将英文方案附在后头:

what you're experiencing is what Windows refers to as "setting the dirty bit" and what you have to do is unset that bit. Every time Windows XP starts, autochk.exe is called by the kernel to scan all volumes to check if the volume dirty bit is set. If the dirty bit is set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume. It is usually caused by a hard shut down or a power loss during a read-right operation on that particular drive.

How do I fix it, you ask?

Well, that's easy. First click Start> Run> bring up a command prompt by typing in "CMD" and type " fsutil dirty query d: ". This queries the drive, and more than likely it will tell you that it is dirty. Next, type "CHKNTFS /X D:". The X tells Windows to NOT check that particular drive on the next reboot. At this time, manually reboot your computer, it should not do a Chkdsk and take you directly to Windows.

Once Windows has fully loaded, bring up another CMD prompt and type and now you want to do a Chkdsk manually by typing "Chkdsk /f /r d:". This should take you through 5 stages of the scan and will unset that dirty bit. Finally, type "fsutil dirty query d:" and Windows will confirm that the dirty bit is not set on that drive.

相关文章

台式电脑维修排行榜

更多>>

网络知识排行榜

更多>>

系统教程排行榜

更多>>

服务号